Hole Saws
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a42p1-a04a-digital@halfx_637084877988902853.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a78p1-a04a-digital@halfx_637085349501748927.png?ver=imagenotfound)
For 9/16"-1 3/16"
Dia. Saws
These standard saws have high-speed steel teeth to make circular cuts in wood, plastic, and metal. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
For technical drawings and 3-D models, click on a part number.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 15/16" Cutting Dp. | |||||||||||
1" | 1/2"-20 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Long-Life Hole Saws
![](/prerenderstable/mvPRE/contents/gfx/imagecache/419/4192a35p1-a04a-digital@halfx_637085939807509308.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a78p1-a04a-digital@halfx_637085349501748927.png?ver=imagenotfound)
For 9/16"-1 3/16"
Dia. Saws
The carbide teeth on these saws last up to twice as long as high-speed steel teeth when cutting fiberglass, plastic, wood, and metal such as aluminum, cast iron, steel, and stainless steel. Attach saws to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 15/16" Cutting Dp. | |||||||||||
1" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Fast-Cut Hole Saws
![](/prerenderstable/mvPRE/contents/gfx/imagecache/410/41005a27p1-a04a-digital@halfx_637084860171742171.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a78p1-a04a-digital@halfx_637085349501748927.png?ver=imagenotfound)
For 9/16"-1 3/16"
Dia. Saws
Specially designed teeth cut faster than the teeth on standard hole saws. Teeth are high-speed steel for cutting wood, plastic, and metal such as aluminum, brass, steel, and stainless steel. Attach saws to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 3/4" Cutting Dp. | |||||||||||
1" | 1/2"-20 | 00000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Hole Saws with Built-In Arbor
![](/prerenderstable/mvPRE/contents/gfx/imagecache/400/4008a611-@halfx_637209219499795624.png?ver=imagenotfound)
Quickly connect these saws to your drill or drill press with the built-in arbor. Saws have high-speed steel teeth for cutting wood, plastic, and metal. A 1/4" diameter pilot drill is included.
For technical drawings and 3-D models, click on a part number.
Dia. | Arbor Shank Size | Each | |
1 15/16" Cutting Dp. | |||
---|---|---|---|
1" | 3/8" | 00000000 | 000000 |
Hole Saws for Hard Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/411/4118a19p1-a04a-digital@halfx_637084849507468990.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/411/4118a61-@halfx_637209189416714899.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/411/4118a56-@halfx_637209023968202079.png?ver=imagenotfound)
The carbide teeth on these steel saws cut hard metal such as steel, stainless steel, cast iron, and titanium. They can be sharpened, so they last longer than saws with carbide-tipped steel teeth. Use them on a drill or drill press. An arbor and pilot drill (sold separately) are required.
Long-Life Hole Saws for Ceramics and Masonry
![](/prerenderstable/mvPRE/contents/gfx/imagecache/693/6930a51p1-a04a-digital@halfx_637085986619522929.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a78p1-a04a-digital@halfx_637085349501748927.png?ver=imagenotfound)
For 9/16"-1 3/16"
Dia. Saws
The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth. Saws are for use on reinforced plastic, Kevlar, stone, brick, and other abrasive materials with high silicon content. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required. To cut ceramic tile, you must use a 1/4" carbide-tipped pilot drill.
For technical drawings and 3-D models, click on a part number.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 5/8" Cutting Dp. | |||||||||||
1" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Hole Saws for Ceramics and Masonry
![](/prerenderstable/mvPRE/contents/gfx/imagecache/419/4194a24p1-a04a-digital@halfx_637085929485353929.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/406/4066a78p1-a04a-digital@halfx_637085349501748927.png?ver=imagenotfound)
For 9/16"-1 3/16"
Dia. Saws
These saws have carbide-grit-coated teeth that cut ceramic tile, fiberglass, masonry, plastic, and composites. Attach them to a drill or drill press. An arbor with pilot drill (sold separately) is required.
Saws | Arbor with Pilot Drill with 1/4" Hex Shank | Arbor with Pilot Drill with 3/8" Hex Shank | Arbor with Pilot Drill with 7/16" Hex Shank | Replacement Pilot Drill for 1/4", 3/8", & 7/16" Hex Shank | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | For Arbor Thread Size | Each | Each | Each | Each | Each | |||||
1 3/8" Cutting Dp. | |||||||||||
1" | 1/2"-20 | 0000000 | 000000 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 00000 |
Hole Saws for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/378/3789a45p1-a04a-digital@halfx_637084863387066912.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/409/4093a52-@halfx_637209140061022663.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/378/3789a61-@halfx_637209138984120204.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/409/4093a71p1-a04a-digital@halfx_637084841489225248.png?ver=imagenotfound)
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel. Use these saws on a drill or drill press. An arbor (sold separately) is required.
Arbors with pilot drill guide your cut.
Arbors with spring-loaded pilot pins push out the slug as you cut. They require a drilled pilot hole.
For technical drawings and 3-D models, click on a part number.
Impact-Driver Hole Saws for Sheet Metal
![](/prerenderstable/mvPRE/contents/gfx/imagecache/113/1137n15p1-a04a-digital@halfx_637085878944944118.png?ver=imagenotfound)
Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece. The built-in arbor has a 1/4” hex shank that makes these saws easy to attach to your impact drill. The included pilot drill has a spring that pushes out the slug.
For technical drawings and 3-D models, click on a part number.
Pilot Drill | ||||||
---|---|---|---|---|---|---|
Dia. | Arbor Shank Size | Dia. | Lg. | Material | Each | |
3/8" Cutting Dp. | ||||||
1" | 1/4" | 5/32" | 2 1/2" | High-Speed Steel | 0000000 | 000000 |
Heavy Duty Hole Saws for Stainless Steel Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/405/4054a19p1-a04a-digital@halfx_637084851261957185.png?ver=imagenotfound)
An extra-thick steel body with carbide teeth can cut through stainless steel structural framing and electrical enclosures. The built-in arbor makes these saws easy to attach to a drill or drill press. They come with a pilot drill that has a spring to push out the slug.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Hole Saws for Sheet Metal and Plastic Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/408/4080a36p1-a04a-digital@halfx_637084848470130730.png?ver=imagenotfound)
The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth. The body widens at the top to prevent the saw from pushing through your workpiece. A built-in arbor makes these saws easy to attach to your drill press. The included pilot drill has a spring that pushes out the slug.
For technical drawings and 3-D models, click on a part number.
Hole Saws for Fiberglass and Plastic Sheets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4146a114carbon-steelnegative_front_positive_top_straighton_1639496122_440@halfx_637750716144867091.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4146a106-@halfx_637520033514165574.png?ver=imagenotfound)
with
Pilot Drill
![](/prerenderstable/mvPRE/contents/gfx/imagecache/414/4146a108-@halfx_637520033522051165.png?ver=imagenotfound)
These saws reduce friction and prevent material buildup when cutting fiberglass and plastic. Attach them to your drill or drill press. An arbor with pilot drill (sold separately) is required.
For technical drawings and 3-D models, click on a part number.
Hole Saw Kits
![](/prerenderstable/mvPRE/contents/gfx/imagecache/404/4044a15p1-a04a-digital@halfx_637084877285241512.png?ver=imagenotfound)
These kits have saws with high-speed steel teeth and a steel body for use on a variety of metal and wood. Attach hole saws to a drill or drill press with the included arbors.
No. of Saws | Dia. | Cutting Dp. | Includes | Each | |
5 | 7/8", 1", 1 1/8", 1 1/4", 1 1/2" | 1 15/16" | 1/4" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Plastic Case | 0000000 | 000000 |
5 | 7/8", 1", 1 1/8", 1 1/4", 1 1/2" | 1 15/16" | 1/4" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 1/2"-20 to 5/8"-18 Arbor Thread Adapter, Plastic Case | 0000000 | 00000 |
7 | 7/8", 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2 1/8" | 1 3/4" | Plastic Case, Two 3/8" Hex-Shank Arbors with One 1/4" High-Speed Steel Pilot Drill Each | 00000000 | 000000 |
12 | 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/2", 3" | 1 3/4" | Two 7/16" Hex-Shank Arbors with One 1/4" Dia. High-Speed Steel Pilot Drill Each, Three Extra 1/4" Dia. High-Speed Steel Pilot Drills, Plastic Case | 00000000 | 000000 |
12 | 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/2", 3" | 1 15/16" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Plastic Case, One Extra 1/4" Dia. High-Speed Steel Pilot Drill | 0000000 | 000000 |
16 | 3/4", 7/8", 1", 1 1/8", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/4", 2 1/2", 3", 3 1/4", 3 5/8", 3 3/4", 4 1/8", 4 3/4" | 1 15/16" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, 7/16" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Three Extra 1/4" Dia. High-Speed Steel Pilot Drills, Metal Case | 0000000 | 000000 |
20 | 3/4", 7/8", 1", 1 1/8", 1 3/8", 1 1/2", 1 3/4", 2", 2 1/8", 2 1/4", 2 1/2", 2 11/16", 3", 3 1/4", 3 3/8", 3 5/8", 3 3/4", 4 1/8", 4 1/2", 4 3/4" | 1 3/4" | 3/8" Hex-Shank Arbor with 1/4" Dia. High-Speed Steel Pilot Drill, Two 7/16" Hex-Shank Arbors with One 1/4" Dia. High-Speed Steel Pilot Drill Each, Three Extra 1/4" Dia. High-Speed Steel Pilot Drills, Plastic Case | 00000000 | 000000 |