Tape is cut into convenient discs and rectangles.

Mount lightweight signs and trim with this economical tape.

The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.

Remove mounted objects from most surfaces without leaving residue behind.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.

The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.

This thin paper tape has a high-bond adhesive on both sides that sticks to glossy surfaces and hard-to-bond plastics.

Made with fire-retardant cotton cloth, this tape is often used to install carpet, padding, and linoleum on stairs and floors.

Use this clear tape for strong, invisible bonds.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

Cut these sheets to create a customized, permanent bond in the shape you need.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

This tape has adhesive on both sides and can be removed and repositioned without leaving residue behind. It meets clean room requirements.

For quick repairs, these small rolls of tape don't have a spool so they easily fit into a pocket.

Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.

This tape forms a stronger bond than our other packaging tape.

Made of chemical-resistant PVC, this tape securely seals packages in harsh environments.

Seal and label packages in one step.

The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.

For refrigerated packing and shipping, this tape sticks even when applied in cold and damp environments.

Fiberglass fibers run along the length of this general purpose strapping tape.

For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.

This tape can hold and secure large, heavy items that may shift during transport.

Wet the adhesive on this gummed kraft paper tape to secure corrugated, printed, and overstuffed cartons.

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.

This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

Use this glossy tape to seal seams and repair vinyl material such as banners.

Create dams in pipes before welding, then wash away with water or steam.

With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.

Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.

For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.

Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.

This tape has an aggressive adhesive that adheres to super-slick surfaces, such as plastic and nylon.

Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.

A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.

Brush on this liquid to mask small surfaces and irregular shapes.

This crepe paper tape keeps its hold, even on 300° F surfaces.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Cover holes, fastener heads, and small areas with these shapes.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

Cover small spots and holes while paint stripping and electroplating, or use as a moisture and dust barrier. These aluminum foil discs are flexible and conform to irregular shapes.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.

Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.

Made of thick vinyl to resist abrasion, these tape sheets protect floor labels from heavy foot and vehicle traffic.

Use this UV-resistant tape to temporarily protect smooth plastic, metal, and glass surfaces.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.

Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.

Protect parts from radiation, X-rays, moisture, dust, and chemicals during electroplating and similar processes.

Low-pile velvet cushions surfaces and absorbs sound. Use it between parts and in acoustic applications.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Seal out light to mask LEDs and prevent backlight bleed on LCD monitors with this opaque polyester tape.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

No need for adhesive—this tape fuses to itself for a permanent seal and stretches to fit virtually any form. Also known as cold shrink tape.

Also known as Scotchfil, this noncorrosive putty tape wraps, stretches, and molds around irregular shapes for insulation buildup.

This chemical-resistant tape has adhesive on both sides.

At only 0.0025" thick, this tape combines conformability with durability and abrasion resistance.

In the event of a fire, this rubber tape expands to protect cables from flames and heat.

The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).

Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive.

Quickly conduct heat away from electronic components. Kapton® polyimide gives this tape excellent electrical isolation.

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

This tape provides a slick surface along with excellent resistance to electrical current.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Backed with 3M VHB 4941 foam adhesive for strength, padding, and vibration resistance.

Protect small parts with these slippery UHMW rings, discs, and squares.

Dissipate static and create a slick surface.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

This tape discharges minor amounts of surface static electricity and resists static buildup.

PEEK offers the best wear and abrasion resistance of our low-friction tapes. Use it for wire wraps and sliding bearing surfaces.

Larger and heavier than standard tape dispensers, these dispensers are sturdy enough to use with reinforced tape as well as masking and office tape.

Line up multiple rolls of office tape, masking tape, and reinforced tape in one dispenser.

Screw these dispensers to a workbench, cabinet, or table.

Select a precise length of tape, then pull the lever to dispense.

Larger and heavier than our other select-a-length dispensers, these stand up to frequent use. Set a precise length of tape with the sliding gauge, then pull the lever to dispense.

To protect sensitive equipment from static buildup, these tape dispensers have a conductive housing and nonskid base that grounds electrical charges by letting them pass through.