For exact positioning, these hoses swivel 360°.

Remove fumes, vapors, and fine dust particles from your space.

In addition to using the handle to carry these exhausters, you can mount them to a wall, bench, or floor.

This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space.

Position these exhausters above drums, tanks, and distillers.

Eliminate static buildup while cleaning air.

Eliminate static buildup while cleaning air.

Carry these small cleaners to job sites to remove odors and dust from the air.

Roll this air cleaner to the contaminant source or place it on a bench top.

Often used in machine shops, these cleaners remove oil and coolant mist from the air.

Save floor space—cleaners mount in a T-bar style ceiling.

These washable, durable filters are made to your dimensions.

These filters are built to withstand higher temperatures than other metal panel air filters.

An inherent electrostatic charge attracts dust and particles to these filters.

Select the dimensions you need for custom-sized frames.

These filters are typically used as replacements in HVAC equipment.

A compound inhibits mildew, mold, and fungi growth.

Rated MERV 13, these filters capture particles down to 0.3 microns.

With tight pleats, these filters have a larger surface area than filters with standard pleats for improved efficiency and an even longer life. These filters strike a good balance of filtering efficiently while allowing airflow, making them a more cost-effective option than higher rated filters.

Eliminate heavy odors with these filters that have 30 times the odor removing ability of standard odor-removal air filters.

Use in exhaust hoods to remove grease and oil from the air.

Wash and reuse these pads. Cut to the size you need.

Wrapped in aluminum mesh for added support, these filters can be used without a frame.

Cut these pads to the size you need.

These pads are an economical choice for protecting more expensive filters that catch finer particles.

With a higher carbon concentration than odor-removal air filter rolls, these pads handle heavier odors.

Replace the filter roll in your automatic filtering equipment.

Multiple panels maximize filtering surface area for long service life.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

An automatic drain discharges up to 300 gallons per hour to handle compressed air with high moisture content.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

Mount these filters to a 35 mm DIN rail with the included brackets.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your SMC modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Also known as coalescing filters, these filter elements fit in ASCO Numatics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Wilkerson modular compressed air filters to remove oil and fine particles.

Also known as coalescing filters, these filter elements fit in Norgren modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Mount these filters to a 35 mm DIN rail with the included brackets.

Use these filters to extend the service life of air-powered tools and equipment and then throw them away when you're done.

Eliminate small traces of oil vapor and its associated odor with these filters and then throw them away when you're done.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Replace a damaged bowl, or change the drain type on your Festo modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Generate clean air for instrumentation and applications with critical air requirements.

Remove bacteria, viruses, moisture, and other particles from compressed air and gases used in food, pharmaceutical, biotech, and electronics applications.

No need to buy and service two filters—these filters have a single element that removes both large and fine particles.

Replace failing or lost O-rings in ASCO Numatics modular compressed air filters.

Replace failing or lost O-rings in Festo modular compressed air filters.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.

Connect two or more of these manifold regulators to meet multiple pressure requirements from a single air supply—set a different output pressure with each regulator.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Adjust and maintain the pressure of your compressed air.

Use these regulators to adjust and maintain the pressure of your tubing air lines.

A 316 stainless steel housing allows these regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

No need to worry about unintentional changes to your pressure setting—these regulators maintain a fixed outlet pressure.

Designed for installation directly to your air-powered tool, these regulators maintain the set air pressure.

Mount these regulators to a 35 mm DIN rail or a wall with one of the two included brackets.

At ±0.1% accuracy, use these regulators in sensitive applications where constant, consistent pressure is important.

With a greater flow capacity than our standard precision compressed air regulators, use these regulators to adjust and maintain air pressure in sensitive high-flow applications where constant, consistent pressure is important.

Keep an eye on the output pressure in high-flow applications—these regulators have a display so you can monitor your application locally.

Designed for control applications that require high reliability and repeatability, these regulators translate electrical signals to output pressure.

Each of these filter/dryers has two desiccant towers—one that absorbs moisture, particles, and oil in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air.

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

For use with Norgren modular compressed air systems, once aftercoolers and separators have removed the bulk of the water, use one of these desiccant-filled dryers to remove any remaining moisture in your air line.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

Cool air through refrigeration to condense water vapor.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Parker filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A filter, regulator, and lubricator with push-to-connect fittings are combined to provide clean, lubricated compressed air at your required pressure. Fittings make a tight seal around tubing.

These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

Mount these filter/regulators to a 35 mm DIN rail with the included brackets.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.