No need for wiring—these lights plug-in with a two-prong plug. Also known as shop lights.

A wraparound lens disperses light from the sides as well as the bottom to produce ambient lighting.

These lights fit into ceiling cutouts.

Don’t waste energy lighting unoccupied spaces--these lights turn on when they detect movement. Set them to turn off after 30 or 180 seconds.

Also known as pendant lights, these fixtures hang from a cord.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

These lights mount to the wall so they're often used in enclosed spaces such as stairwells, hallways, and storage rooms.

Suspend or mount with fasteners to the ceiling.

Mount lights in recessed spaces so the lens is flush with the wall.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Lenses disperse light to reduce glare, while protecting bulbs from damage.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

Update conventional fluorescent tubular lights with newer LED technology. These lights are furnished with brackets that have the same hole pattern as most older lights for easy changeover.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

Illuminate outdoor areas and objects such as parking lots, flag poles, and billboards.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

No need for wiring—these lights plug-in with a three-prong plug.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Bring light to areas that don't have electrical power service.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

Use these with portable lights that use screw-in bulbs.

Compact and easy to carry, these IP65-rated lights stand up to dust and low-pressure jets of water. The head adjusts up and down as well as side to side to direct light where it's needed.

The handle on this floodlight also acts as a stand—pivot it 360° to aim light where it's needed. This floodlight is small and easy to carry to job sites that don't have electrical power.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable.

No need for wiring—these lights plug-in with a two-prong plug.

Mount add-on heads in remote areas to extend emergency lighting.

These lights are UL rated for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed.

Block the transmission of ultraviolet light.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

Replace worn sockets in light fixtures.

Turn an overhead outlet or an extension cord into a temporary light. These sockets have a two-prong plug for a quick connection.

Convert a fixture that uses candelabra-base bulbs to accept medium-base bulbs with these adapters.

Connect lamp components and conceal wires.

Use these bulbs in standard sockets, panels, and appliances.

Install miniature light bulbs into control panels, machines, and other devices using bulb holders.

These bulbs are small, but very bright, so they're often used in flashlights and optical instruments such as projectors and microscopes.

Often used in task lights, these two-pin wedge base bulbs are comparable to PL, Dulux, and Biax bulbs.

These filters fit over miniature light bulbs with a bulb diameter up to 7/16".

Replace hard-to-grip miniature bulbs in equipment such as control panels and indicators. Install new bulbs without leaving behind oil from your fingers that can cause bulbs to burn out.

The lamp and the lens are mounted on separate arms to provide ultimate flexibility. Bend the neck to any position and it will stay in place.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing.

LED magnifiers offer long life and emit a focused, even light beam for distortion-free viewing

Use where electrostatic discharge is a concern.

Textured surfaces and irregularities are more visible.

Use for inspection and bug and rodent detection.

The combination of UV light and magnifying lens lets you see the smallest traces of fluorescence while inspecting.

In addition to being more energy-efficient than magnetic ballasts, these are lighter and quieter.

These ballasts are often found in older installations.

Illuminate outdoor flags without connecting to an electric power source. These lights have a built-in solar panel that gathers energy from the sun throughout the day to power them at night.

Use these quiet, indoor traps to lure and kill flying insects with UV light bulbs which are placed next to sticky glue boards.

These chambers kill viruses, bacteria, and other microbes with ultraviolet germicidal irradiation (UVGI). They’re enclosed to protect users, with a UV-blocking window and an automatic shut-off function if the door is opened while they’re running.

Turn a light socket into a radiant heater. These lamps generate heat with a ceramic element rather than an infrared bulb.

Position these lamps 6"-8" from what you want to heat.

Spot-dry paint, adhesives, and other surface coatings and fillers.

Cover large areas with these long lamps.

Set the lamp on a bench top and rotate the head 360° to direct light.