Switch out your end-of-arm tools quickly and easily with these tool changers.

Connect your robot arm to tools or extensions made from T-slotted framing.

Extend the reach of your robot arm, so it can access the full width of a conveyor or the bottom of deep containers.

No need to manually latch and unlatch end-of-arm tools, these tool changers will quickly and seamlessly swap them out for you. While manual tool changers are good for switching tools in between two different work cycles, these automatic tool changers are best for making multiple changes in a single work cycle.

Attach threaded vacuum cups to robot arms with different ISO mounting patterns.

Use these mounts with robot bases to secure your controller near your robot arm for easy access and to cut down on cord lengths.

Raise and lower your robot arm on these workstations, placing them at the right height for each task.

Extend the horizontal reach of your Universal Robots’ arm to operate your robot at multiple positions along an assembly line, or transport workpieces from a conveyor to your CNC.

These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights.

Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of these lifters have a flexible balloon-like cup that’s made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Lift and move porous, uneven, and delicate items without damaging them.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

Pick up long, narrow items in your sanitary facility with these cups—they connect to threaded fittings on your vacuum system.

These cups are made of FDA listed silicone rubber to withstand the extreme temperatures in food processing applications.

These cups maintain their grip even as contents shift and the bag changes shape during lifting.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

The bellows on these cups handle items with varied heights and angles better than flat cups.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Press these cups onto unthreaded fittings on your vacuum system to pick up bread, pastries, and other soft material.

Slide these cups onto unthreaded fittings on your vacuum system to gently pick up bags, plastic film, and other sanitary wrappings.

Drain static charges from electronics and other sensitive, textured items as you lift and move them with your vacuum system.

Connect these magnetic grippers to an air system to lift odd-shaped and perforated metal parts that often cause traditional vacuum cups to lose hold.

These grippers pick up a product and turn it 180° before releasing.

Unlike air-powered grippers, which leak air, these electric grippers won’t release dirt or particulates, making them good for pick-and-place assembly, packaging, and finishing jobs in labs, electronics plants, and other clean environments. Often used with mobile robots, all have a servomotor that opens and closes the grippers with equal force.

Build a complete robot gripping tool using these grippers, fingers, and robot tool mounts.

Avoid jams and keep automated assembly, bin picking, and machine tending jobs running smoothly.

These finger blanks come ready to mount to SMC or Schunk grippers, so you can make custom fingers without starting from scratch. Just machine the blank’s gripping end to create fingers that will securely grip your specific parts.

Designed for specific robot models, these kits have all of the parts required to create a cable and hose carrier. Use them to organize and protect cable and hose without obstructing your robot’s movement.

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Designed for smooth, quiet travel, these carriers minimize clicking and jumping in vibration-sensitive applications such as printing and scanning.

One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.

Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

Rated NEMA 6P, 13, and IP67, these switches are protected from corrosion, oil/coolant spraying, washdowns, and temporary submersion.

Rated IP67, these switches are protected from temporary submersion. When an object in motion comes into contact with the actuator, it sends a signal to open or close a circuit.

Secure these switches into panels using mounting nuts.

Often used on conveyor systems and bin filling operations, these switches have the rapid-closing action of a snap-acting switch but have a large actuator for sensing larger objects.

Use these switches where ignitable gas and dust may be present. They meet NEC Class I, Division 1, Groups B, C, and D; and Class II, Division 1, Groups E, F, and G for hazardous locations.

Prevent equipment from automatically restarting—these switches must be manually reset each time they're actuated.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Delay access to hazardous areas until conditions are safe; use these switches with machines that take time to stop after they are turned off. They mount to a door frame.

Rated IP67 and NEMA 6, these switch mats withstand washdowns.

These mats fit under carpeting or anywhere else you want to hide them.

Prevent personnel from getting too close to dangerous equipment when equipment is on—these mats turn equipment off when someone steps on them or when a fault is detected.

These narrow switches are also thin enough to be hidden under carpeting or installed anywhere space is limited.

Scanning 275° side-to-side for people and objects, these switches (known as safety laser scanners) cover large areas and send signals to machinery to prevent accidents.

Wire contacts to an alarm system to alert when doors or windows are opened.

Also known as HMIs, program these touch-screen interfaces to control PLCs, inverters, and other automated equipment.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

Combine posts, panels, and doors to create a barrier around equipment.

Cover robot arms and tools with this padding to help prevent injuries in areas where people are working nearby. When the padding is touched, pressure sensors signal your machine to stop moving.

Since these pumps don’t require lubrication, there’s no risk of oil contamination. Use them for air and gas sampling, filtration, and refrigeration service.

Generate the suction you need to power end-of-arm tools, such as vacuum cups and grippers, without using an installed vacuum system. These pumps, also known as venturi devices, connect to any compressed air source and come with all the electrical connections you need to start lifting or moving objects.

Use these pumps in applications such as degassing and servicing refrigeration and freezer systems.

Convenient for one-handed liquid sampling and extraction, these pumps are often used for vacuum filtration and bleeding hydraulic and liquid lines.

Also known as venturi pumps, these compressed-air-powered pumps are commonly used in vacuum packaging, pick-and-place operations, and end-of-arm robotic tooling.

Make your own thermocouples.

Make custom RTD probes.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

With a life span of more than 20 million high-speed flex cycles, this cable lasts twice as long as standard continuous-flex cable. The frequent motion will not degrade data or signal transmission.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.